|
| |
 Clutch
Water pump
 Clutch
|
Slipping related problems
Clutch drag related problems
Shuddering and chattering problems
Abnormal noises and inability to drive (broken clutch)
Clutch cover selection errors and clutch mechanism operation failures
|
Abnormal noises and inability to drive (broken clutch) |
| Condition : Broken disc component. |  | Disc related
causes | Cover related
causes | Other causes | Cause :
1. Misalignment of the crankshaft and input shaft or other problem caused disc breakage, ejecting springs and other components.
2. Installation error.
| Cure :
1. Replace disc and cover with new parts.
2. Ensure centering when installing the transmission.
|
|
| Condition : Broken disc component. |  | Disc related
causes | Cover related
causes | Other causes | Cause :
1. Misalignment caused disc to break and engine power is not being transmitted.
2. Installation error.
| Cure :
1. Replace disc and cover with new parts.
|
|
| Condition : Broken disc component. | | | Disc related
causes | Cover related
causes | Other causes | Cause :
1. Excessive partial clutch engagement or mis-shifting caused the facing to burst.
2. Improper driving method.
| Cure :
1. Improve driving method.
|
|
| Condition : A cover component is broken. | | | Disc related
causes | Cover related
causes | Other causes | Cause :
1. Significant run-out on the flywheel broke the cover's retracting spring.
2. Improper installation.
| Cure :
1. Replace flywheel with new part.
|
|
| Condition : The edge of the diaphragm spring shows abnormal wear. |  | Disc related
causes | Cover related
causes | Other causes | Cause :
1. Misalignment of the crankshaft and input shaft or the bearing caused the edge of the diaphragm spring to wear, preventing smooth rotation of the bearing.
2. Installation error.
| Cure :
1. Replace cover with new part.
2. Ensure centering of the bearing.
|
|
| |
| |
| |
| |
